Drip Pipes

  DRIPPING WATER PIPE SYSTEMS AND FEATURES

Dripping water systems with the latest technology used in irrigation technology in the world are produced in accordance with TS EN 9261 standards. Purified water and small through fertilizer or irrigation emitters and is a steady flow is supplied to the soil surface or roots dropwise.  The amount of water wasted each year because of mistakes made during the period that needs every drop of rain that will burn the whole world, especially in irrigation systems to increase agricultural productivity is to find millions of cubic meters.


That's why millions of cubic meters of water plants in the waste going in the name of drip irrigation systems, more thirst being inserted into the stress is being watered more frequently with less water, greenhouse, vegetables, fruit trees and has become the ideal system for irrigation and decreased work done by releasing irrigation system. 16, 17, 20 and 22 mm diameter flat drip irrigation pipe produced in, and varying amounts of water may drip tube wall thickness can vary from 12 nm to 6 nm. Longer distances thickness of flat drip irrigation pipes can be made thinner than the round drip irrigation tubing, drippers and dripper spacing is flat can vary from 20 cm up to 50 cm. The round drip irrigation pipes 16 and 20 mm in diameter in the 0.9 - 1.2 mm wall thickness are produced from. Drip irrigation pipe made for short distances emitters are circular. Coil lengths of 200 m and 400 m and up to 4 liters of water per hour from 2 liters can be dripped. 

DRIPPING WATER PIPES BENEFITS OF DRIP IRRIGATION METHODS

- Provide increased efficiency at maximum level.
- Low pressure minimizes the minimum level of water consumption.
- To provide fertilizer savings.
- Protects the Foreign and weeds.
- Increased Efficiency varies according to region and climate.
- Yield and quality of irrigation is very high.
- Because of the irrigation; the ability to provide early harvest
- The irrigation shape; water loss does not happen.
Because of the irrigation; irrigation system efficiency is the highest.
- Provides an equal amount of irrigation facilities all over the land and sloping terrain does not make a watering will cause erosion.
- Wind is not an obstacle for irrigation.
- Compared to other irrigation methods is almost no watering and fertilizing labor.
- Sloped land in other irrigation methods, soil loss by water and without opening the way to more successfully and easily.

DRIPPING WATER PIPES APPLICATION AREA

- Greenhouse
- Place sown or planted vegetables (tomatoes, peppers, lettuce, broccoli, salad, onion etc.), floriculture
- Fruit trees and vineyards
- Place the planted some crops (sunflower, corn, potatoes, cotton)

ROUND DRIP IRRIGATION PIPES TECHNICAL STATEMENTS AND DOCUMENTS
Extension Distances

Distance between the pipes on the drippers

Pipe Type

Debi

20 cm

25 cm

33 cm

40 cm

50 cm

60 cm

75 cm

100 cm

FR-K 09 o16 Boru Çapı 16 mm
Thickness 0,90 mm

2 Litre / hour

44 mt

51 mt

58 mt

40 mt

84 mt

97 mt

112 mt

135 mt

4 Litre / hour

30 mt

33 mt

40 mt

51 mt

58 mt

66 mt

77 mt

94 mt

Recommended max. Drip Irrigation Pipe Length

ROUND DRIP IRRIGATION PIPES

Outer diameter (mm)

FLOW (L/h)

OPERATING PRESSURE (BAR)

Thicknes (mm)

DRIPPER RANGE (cm)

COIL LENGTH (m)

16

1,2

1

0,4/0,5/0,6/0,7/0,8/0,9/1

20,25,30,33,40,50,60,75,100

400

2

1

0,4/0,5/0,6/0,7/0,8/0,9/1

20,25,30,33,40,50,60,75,100

400

4

1

0,4/0,5/0,6/0,7/0,8/0,9/1

20,25,30,33,40,50,60,75,100

400

20

1,5

1

1/1,1

20,25,30,33,40,50,60,75,100

300

2

1

1/1,1

20,25,30,33,40,50,60,75,100

300

4

1

1/1,1

20,25,30,33,40,50,60,75,100

300

PRESSURE ADJUSTABLE ROUND DRIP IRRIGATION PIPES0

Outer diameter

Flow (L/h)

OPERATING PRESSURE (BAR)

Thickness(mm)

DRIPPER RANGE (cm)

COIL LENGTH
(m)

16

2

0,8-4,5

0,9/1

20,25,30,33,40,50,60,75,100

400

4

0,8-4,5

0,9/1

20,25,30,33,40,50,60,75,100

400

20

2

0,8-4,5

1/1,1

20,25,30,33,40,50,60,75,100

300

4

0,8-4,5

1/1,1

20,25,30,33,40,50,60,75,100

300

ROUND DRIP IRRIGATION LINE DRAWING DISTANCE

PIPE DIAMETER (mm)

THICKNESS (mm)

FLOW
(L/h)

DRIPPER RANGE (cm)

20

25

30

33

40

50

60

75

100

16

0,9

1,2

66

77

87

91

105

123

138

164

201

0,9

2

46

59

61

70

81

97

110

127

154

0,9

4

35

38

40

44

51

62

71

82

99

16

1

1,2

60

70

80

86

99

116

134

155

196

1

2

40

52

60

64

69

83

92

108

135

1

4

30

33

36

39

46

54

61

75

92

20

1

1,5

80

88

93

105

115

130

148

175

201

1

2

77

83

93

96

109

123

142

165

178

1

4

55

66

78

89

102

120

129

148

170

20

1,1

1,5

78

86

91

102

111

127

143

170

195

1,1

2

75

82

87

94

107

121

138

161

171

1,1

4

51

62

74

83

96

112

121

142

158

PRESSURE DROP OF WATER PIPELINE ROUND ADJUSTABLE LENGTHS

DIAMETER

FLOW

PRESSURE

DISTANCES DRIPPER

20cm

25cm

30cm

33cm

40cm

50cm

60cm

75cm

100cm

16 mm

2 L/h

1,5 bar

52

63

74

81

95

114

132

158

198

2,0 bar

60

75

87

95

111

134

156

186

233

2,5 bar

68

83

97

106

125

151

175

209

261

3,0 bar

74

90

106

114

135

163

189

227

284

3,5 bar

79

96

113

123

145

175

203

243

303

4,0 bar

84

102

119

130

153

184

214

256

322

4,5 bar

87

107

125

136

160

194

225

270

337

4 L/h

1,5 bar

36

44

52

56

66

80

92

110

138

2,0 bar

42

52

60

66

78

94

108

131

163

2,5 bar

47

58

67

74

86

105

122

146

182

3,0 bar

51

62

73

80

94

114

132

158

198

3,5 bar

55

67

79

85

101

122

141

169

212

4,0 bar

58

71

83

90

107

129

150

180

225

4,5 bar

60

74

87

95

111

135

156

188

235

20 mm

2 L/h

1,5 bar

78

95

111

121

142

172

200

239

299

2,0 bar

91

111

131

143

168

204

235

282

353

2,5 bar

102

125

146

159

188

227

263

316

395

3,0 bar

110

135

159

173

204

247

286

343

429

3,5 bar

118

145

170

184

218

263

306

367

459

4,0 bar

125

153

180

195

230

278

324

388

486

4,5 bar

131

160

188

204

242

292

339

406

510

4 L/h

1,5 bar

54

66

78

84

100

120

139

166

208

2,0 bar

63

78

91

99

117

142

164

197

247

2,5 bar

71

86

102

110

131

158

183

220

276

3,0 bar

77

94

110

120

142

172

200

239

300

3,5 bar

83

101

118

129

152

183

213

255

321

4,0 bar

86

107

125

136

160

194

226

270

339

4,5 bar

91

111

131

142

168

204

237

284

355

HOW DRIP IRRIGATION IS PERFORMED ?

- The installation of drip irrigation Pipe reel and spool release mechanism. One of the issues to be most noticeable during the opening of the pipe is not be able to scrub the hard parts of the pipes and worn. - During the laying of the pipe that opens the curl is to be a subject is broken pipes and other care. In these cases it will lead to a reduction in the leakage and tube life. 
- Spreading operation is performed while the drift tubes One of the mistakes made because it is long. Dragging propagated tear and puncture the pipe may occur.
- Drip irrigation drippers, peat moss, sand, silt, clay, heavy metals that may be present in water, residues, algae, bacteria, dirt, etc can become clogged for reasons of. For this reason, drip irrigation pipes are used in systems where the filter should be used.
- Measure in determining the flow rate of drip irrigation pipes, and the pipes in the design of the pressure is taken as 1 bar in the recipe (ISO 9261).
- Collection of drip irrigation pipes before the line breaks in the pipe should be opened and the waste should be cleaned. Carbonate concentrations in the pipe % 0,5 – 1,0 cleaned with HCl solution to be injected into the tube.
- Measure in determining the flow rate of drip irrigation pipes, and the pipes in the design of the pressure is taken as 1 bar in the recipe (ISO 9261).
- Collection of drip irrigation pipes before the line breaks in the pipe should be opened and the waste should be cleaned. Carbonate concentrations in the pipe % 0,5 – 1,0 cleaned with HCl solution to be injected into the tube.
- Drip irrigation pipes should be cleaned regularly.
- Chemical conditioners should be added to the irrigation water as needed.
- Main drip before installation the pipes must be clean.
- During assembly the end of the pipe line should be kept closed.
The main holes to be opened pipes, drip pipes should be installed now.
- After assembly, the system should be cleaned with water.
- The irrigation system for at least 30 minutes at the end of the fertilization process to include the cleansing of the given system.
- Insoluble in water may cause clogging of drippers completely and easily use fertilizers.
- The fertilization process of the irrigation system should be done after the operating pressure has been reached.
- Used in the harvest, machinery and equipment, crates, etc. product collection containers, hand tools, dripping pipes should be avoided and damage to the pipe should not be left on.

FLAT DRIP IRRIGATION PIPE

Providing irrigation for long distances; thinner Wall thickness compared to dripping water pipes round, more flat tube with drippers. Installation cost is low, because of the homogeneity of the flow round type drip irrigation pipe drip advantage also preferred for the use of flat tubes began to spread all over the world in recent years. 16-17-20 and 22 mm in diameter, 1.6 and 2.2 litres per hour only dripping water, Wall thickness 6 miles, 24 miles, flat drip irrigation pipes produced reaches the consumers. The last period of global warming that lived in the world every year due to dwindling water resources specific to the use of dripping water pipes should be shown as a precaution, and should be taken to prevent water from being wasted every year millions of cubic feet. Where you can find details about drip irrigation pipe with flat in the table are stated below;

FLAT DRIP IRRIGATION PIPE FITTINGS SPECIFICATIONS

- Resistant, high-quality polypropylene raw material is manufactured.
- Ø17 mm, mm O22 seamless flat drip irrigation is used.
- Sealing with gasket grommet Grommet to get the output that will be used according to the Product Type to be 16mm or 20mm diameter hole should be drilled in the pipe.
- Output contas, Layflat, and low density polyethylene (LDPE) Pipes (Flat drip irrigation pipe), and O22 mm Ø17 mm flat drip irrigation pipe is used to retrieve its output. We pipe the output to get the output contas with the edge, the hole diameter 8 mm) so that should be drilled.
- Because it is opaque to UV rays and does not allow bacteria growing mossing. 
- Homogeneous and porous interior surfaces.
- Does not contain any foreign matter that could alter the taste and odor of the water.

FLAT DRIP IRRIGATION PIPE

Nominal diameter (mm)

Flow (L/h)

OPERATING PRESSURE (BAR)

Thickness (mil)

DRIPPER SPACING (cm)

Inner Diameter (mm)

16

1,6

1

6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36

15, 20, 25, 30, 33, 40, 50, 60, 75, 100

15,90

2,0

2,4

3,6

17

1,6

1

6, 8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36

15, 20, 25, 30, 33, 40, 50, 60, 75, 100

16,90

2,0

2,4

3,6

20

1,6

1

8, 10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36

15, 20, 25, 30, 33, 40, 50, 60, 75, 100

19,90

2,0

2,4

3,6

22

1,6

1

10, 12, 14, 16, 18, 20, 22, 24, 26, 28, 30, 32, 34, 36

15, 20, 25, 30, 33, 40, 50, 60, 75, 100

21,90

2,0
2,4

3,6




FLAT DRIP IRRIGATION PIPE LINE PULL DISTANCES

Ø16mm 1.6 L/H flow rate flat drip irrigation pipe

Slope (%)

DRIPPER spacing (cm)

20

25

30

33

40

50

60

2

61

73

78

82

92

98

114

1

73

97

107

114

131

138

154

0

85

120

126

141

175

189

204

-1

98

130

132

147

182

199

223

-2

109

136

150

163

194

228

265

Ø16mm 2.0 l/h flow rate flat drip irrigation pipe

Slope (%)

DAMLATICI ARALIKLARI (cm)

20

25

30

33

40

50

60

2

56

65

69

73

81

87

97

1

65

82

91

96

109

117

133

0

75

105

113

124

150

170

184

-1

82

113

119

131

159

178

201

-2

94

118

129

142

172

200

231

Ø16mm 2.4 l/h flow rate flat drip irrigation pipe

Slope (%)

DRIPPER spacing (cm)

20

25

30

33

40

50

60

2

49

55

59

61

67

73

77

1

56

64

71

74

82

92

101

0

63

87

97

104

120

146

160

-1

70

92

102

111

131

153

175

-2

76

97

104

116

144

166

189

Ø16mm 3.6 l/h flow rate flat drip irrigation pipe

Slope (%)

                             DRIPPER spacing (cm)

20

25

30

33

40

50

60

2

36

44

52

56

62

68

72

1

48

56

64

67

72

80

88

0

56

78

84

87

98

112

130

-1

62

79

90

98

114

128

146

-2

74

86

98

104

120

142

162

THE RECOMMENDED MAXIMUM LINE LENGTHS (UP TO 10% OF THE CHANGE IN FLOW RATE)

FLAT DRIP IRRIGATION PIPE LINE PULLS DISTANCES

Slope (%)


RANGES DRIPPER
(cm)

20

25

30

33

40

50

60

2

65

77

82

87

98

104

122

1

77

103

113

121

139

146

170

0

91

128

134

149

186

201

216

-1

104

138

140

156

194

211

237

-2

115

144

160

174

206

242

281

Ø17mm 2.0 l/h flow rate flat drip irrigation pipe

Slope(%)

DRIPPER spacing (cm)

20

25

30

33

40

50

60

2

63

69

73

77

86

92

104

1

69

87

96

102

116

124

142

0

80

112

120

132

160

180

195

-1

91

120

126

139

169

189

214

-2

99

124

138

151

182

212

245

Ø17mm 2.4 l/h flow rate flat drip irrigation pipe

Eğim (%)

Dripper spacing (cm)

20

25

30

33

40

50

60

2

53

59

63

65

71

77

81

1

60

68

75

79

88

98

107

0

67

93

103

111

128

155

170

-1

74

98

108

118

139

163

186

-2

80

103

110

123

153

176

201

Ø17mm 3.6 l/h flow rate flat drip irrigation pipe

       Slope (%)

Dripper spacing (cm)

20

25

30

33

40

50

60

2

39

46

54

59

66

72

76

1

51

59

68

71

76

85

93

0

59

83

89

92

104

119

138

-1

66

84

95

104

121

136

155

-2

78

91

104

110

127

153

172

THE RECOMMENDED MAXIMUM LINE LENGTHS (UP TO 10% OF THE CHANGE IN FLOW RATE)

FLAT DRIP IRRIGATION PIPE LINE PULL DISTANCES

Are produced between ø20 mm 1.6 L/H flow rate flat drip irrigation pipe

Slope  (%)

Dripper spacing (cm)

20

25

30

33

40

50

60

2

68

73

77

79

82

86

88

1

87

97

105

111

120

130

139

0

118

135

152

162

177

236

261

-1

152

177

210

224

253

295

337

-2

177

210

236

246

269

337

346

Are produced between ø20 mm 2.0 l/h flow rate flat drip irrigation pipe

Slope (%)

Dripper spacing (cm)

20

25

30

33

40

50

60

2

66

71

75

76

79

83

85

1

82

95

103

108

115

126

131

0

108

126

141

151

168

211

234

-1

133

157

184

197

223

260

300

-2

153

181

205

218

245

299

307

produced between ø20 mm to 2.4 l/h flow rate flat drip irrigation pipe

Slope(%)

Dripper spacing (cm)

20

25

30

33

40

50

60

2

62

67

72

73

76

80

81

1

76

93

99

104

109

120

122

0

97

116

128

137

156

180

202

-1

111

133

152

165

187

217

255

-2

125

145

168

184

215

253

260

 produced between ø20 mm 3.6 l/h flow rate flat drip irrigation pipe

Slope (%)

Dripper spacing (cm)

20

25

30

33

40

50

60

2

43

53

62

67

74

82

86

1

58

67

77

80

86

96

106

0

67

94

101

104

118

134

156

-1

74

95

108

118

137

153

175

-2

89

103

118

125

144

173

194

THE RECOMMENDED MAXIMUM LINE LENGTHS (UP TO 10% OF THE CHANGE IN FLOW RATE)

COPYRIGHT © 2015 KUZEYBORU ALL RIGHTS RESERVED
~/Scripts/jquery.easing.min