PVC Pipes

PVC Water Pipes, TS 274-2 at 1452-2 standards produced as required Pressure PVC water pipes DIN 8061-8062 in various diameters ,pass Muffle and Muffle Adhesive ASTM 1477 standard, it can be produced in the appropriate thickness according to the safety factor. The pipes are used in the territory under the conditions and to withstand the drinking water lines. That sudden weather changes and high resistance to hot PVC pipes for water, airtightness and durability. PVC pipes show high resistance to impact is pressure resistant to organic and inorganic acids and alkalis. Also at 60 ° C as an important feature of up to deform it also harbors.

plastic-pipe-and-fittings

Advantages of PVC Pipe

  • Due to the light to carry and easy to install.
  • PVC Pipes does not change the taste of water
  • PVC Pipes Micro-organisms can not create environments that will allow their reproduction.
  • PVC PipesInternal and is resistant to external pressure.
  • The long-lasting resistant to rot and corrosion od PVC Pipes.
  • PVC Pipes pressure loss is low.
  • PVC Pipes surface is glossy and smooth.
  • PVC Pipes Flammable is not flammable.
  • PVC Pipes has high impact resistance.
  • Pressure is fully compatible fittings of PVC Pipes.
  • Other plastics used oil is less than in uremia caused by material and less energy is consumed by all the plastic materials in the most environmentally friendly pipes.In addition, environmental cleaning and also provided in addition to the continuation of economic life for that possibility again and again until it can be processed more importantly, PVC raw material is required. So in order to remove PVC burn it down and then it has a chance to produce new PVC by recycling. 
  • All kinds with high resistance to chemicals is made according to fluid transport. In the table below we can see that it is in a very good state of PVC pipe against chemicals and acids.

PVC Pipe Usage Areas

  • PVC Pipe used in city and settlement infrastructure located in the drinking water network.
  • PVC Pipe used in agricultural irrigation networks.
  • PVC Pipe used in waste water networks.
  • The sewerage system can be used PVC Sewerage Pipes
  • Industrial premises can be used PVC Pipe.
  • In the fire mains can be used PVC Pipes with safely.
  • PVC Pipes for swimming pools
  • PVC Pipes Drain lines
  • Cable protection systems are also used for insulation and safety.

Because of the widespread use of PVC pipe as can be seen when viewed in their areas is clear. Based on the growing population of people with advancing technology and investment will continue to increase. The period during which the continued use of PVC pipes will continue to increase in many projects. PVC pipe to ensure water is the most basic and the most important needs of our lives will continue in the role and importance in our lives. PVC rigid and flexible There are two types of areas. More rigid PVC pipe, window profile, wall coverings, etc. used in the field. These weather resistant, high strength, hard and have a self-combustible material properties. The flexible PVC for flooring, shoes and slippers soles of being used in medical applications and many other applications.

PVC Pipes Degradation and Service Life

There are two factors which cause deterioration in lifetime of the PVC pipes. These are: HEAT and LIGHT. * PVC pipes, heat the deterioration of hydrogen chloride is caused by the release. Due to This release of gas in the pipe due to the discoloration yellow color occurs. According to the deterioration degree as before with the color of the PVC pipe flushing, redden up, brown and black are seen. In the table below we have provided it gives us information about how to withstand pressure over a period of 25 years of PVC pipe.

When PVC pipes contain UV additives and is exposed to UV rays or gamma rays deteriorates. PVC-U pipes, because they are not brittle crystalline. However, if materials such as polyethylene and polypropylene in 80 to 85 percent has a crystal structure. Here is the reason that why is crystalline significant ;  if the crystaline structure is more in the structure that much it becomes brittle when it faces sunlight. This explains why the point we made of polyethylene and polypropylene molecules are parallel to each other, connecting  the mixed form PVC is difficult to break the bonds of PVC also for this reason. In addition, pipeline laying of PVC pipes to be manufactured in thicknesses stipulated in the standards and should not be used more than 9% calcite.

Otherwise, the pipes are passed, the pressure tests will lead to extinction even in less than the time that have been required. One of the most important factors affecting the quality of the pipeline is also made in the consolidation process pipeline.  Leaching process at the beginning the problem that occurs in pipeline is that in ground consolidation revenues and 70%. Difference in diameter between the pipes to be joined in order to prevent this should not be more than 4 mm. If this difference is exceeded in diameter then they are likely to come up problems mentioned above. Because it engages both tubes are abundant and will start leaking from that point in time. Pipes and fittings of them is a matter that should be considered when taken from the same company. Because each company may have different tolerance amounts that will cause problems in the assembly process of PVC.

PVC Pipes Raw Material

PVC Pipes raw white of a raw material is a substance which has many positive features. Which began to be developed in 1875, are being used in the production of PVC industry has been established in 1930.  PVC raw material of chlorine and 43% ethylene (obtained by passing through a series of processes crude oil) is obtained by reacting with an eachother. The use of less oil product production and the low cost of raw for PVC Pipes has a great advantage over  Polyethylene Pipe and Polypropylene Pipe raw material. Briefly, PVC Pipes raw material prices world oil depends on oil world, but the use of oil reserves is less than the level.

Formation of PVC: PVC Pipe raw materials, salts, obtained by separating the electrolysis method with chlorine gas obtained in the distillation of crude oil obtained by introducing ethylene gas to interact with specific chemical reaction to be moved to the basic structure of vinyl chloride. through promoter to obtain large molecules added to each other (polymerization) is produced by the method. The polymerization process is carried out in a closed reactor. At every stage of this process it serves to ensure the monitoring of the raw material. To produce chlorine gas is subjected to sea water electrolysis process. As a result of this process we use sea water; chlorine, caustic soda and hydrogen are divided into three components. Looking at the chlorine gas with the process for obtaining ethylene gas requires further chemical processes.

PVC Pipe Price List

Pvc Pipe will be indispensable for your projects with its high quality and unique advantages. You can contact live support to get a PVC Pipe price quote suitable for your project. You can send an e-mail to export@allplasticpipe.com.

PVC waste water pipes
Privacy Settings
We use cookies to enhance your experience while using our website. If you are using our Services via a browser you can restrict, block or remove cookies through your web browser settings. We also use content and scripts from third parties that may use tracking technologies. You can selectively provide your consent below to allow such third party embeds. For complete information about the cookies we use, data we collect and how we process them, please check our Privacy Policy
Youtube
Consent to display content from Youtube
Vimeo
Consent to display content from Vimeo
Google Maps
Consent to display content from Google